2003 Ford Ranger Loping, stalling and hissing.

Tiny
THEGLOVE
  • MEMBER
  • 2003 FORD RANGER
Shakes or Wobbles problem
2003 Ford Ranger 6 cyl Two Wheel Drive Automatic

I have a 2003 Ford Ranger Edge edition. My truck has been having a few problems lately, but the biggest one right now happened when the check engine light came on.

I ran the code and it is a System Too Lean on both banks. After the code came up my truck began loping really badly after it has warmed up, and has even stalled out a few times. I changed my fuel filter, which was very dirty, but my truck is still loping and stalling on me.

There is also a very loud hiss coming from the center of the top of the engine underneath the hood. I can't tell whether this is a vacuum line leaking or a bigger problem. Please let me know anything ASAP.
Wednesday, June 9th, 2010 AT 12:45 PM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
If you hear a hissing, that is the problem. It's a vacuum leak. And yes, that will cause a lean mixture. Check closely for damaged, broken, or disconnected hoses. Also, make sure the throttle body is tignt and check around the bottom of it for any evidence of leaks.

Let me know what you find.

Joe
Was this
answer
helpful?
Yes
No
Friday, June 11th, 2010 AT 10:36 PM
Tiny
THEGLOVE
  • MEMBER
  • 5 POSTS
I found a pencil size hole in my PCV valve hose and I'm going to replace it, but I highly doubt that's my problem. I'm going to wait until I replace that hose first, just to rule it out. I've heard of problems with a linkage underneath the upper intake, but I really don't feel like taking that off if there's a good chance of it being something easier.
Was this
answer
helpful?
Yes
No
Saturday, June 12th, 2010 AT 12:47 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
I feel confident that the sound you hear is from the PCV hose. Let me know if that fixes the problem.

Joe
Was this
answer
helpful?
Yes
No
Monday, June 14th, 2010 AT 1:00 AM

Please login or register to post a reply.

Sponsored links