When removing the trans do you have to remove the exhaust

Tiny
IRONARNOLD
  • MEMBER
  • 1992 FORD RANGER
When removing the trans do you have to remove the exhaust and y pipe are can I maneuver around it? I'm replacing the slave cylinder so any heads up on that would be a help. Thanks
Sunday, March 29th, 2009 AT 10:32 AM

3 Replies

Tiny
RACEFAN966
  • MECHANIC
  • 5,029 POSTS
Ok first off are you doing this on the ground or on a lift? Do you have a trany jack or not? Get back to me and then I will look up the whole procedure and get it to you.
Was this
answer
helpful?
Yes
No
Tuesday, May 4th, 2021 AT 10:54 AM
Tiny
IRONARNOLD
  • MEMBER
  • 2 POSTS
I'm doing this on the ground and I don't have a trans jack. I got the front up on jack stands and I have a haynes manual for step by step and it says I have to remove exhaust but it's so rusty theres only one way for it to come off (sawsall).I've completed all the steps up to this and if I can get around it that would save time and $ on the way back together.
Was this
answer
helpful?
Yes
No
Tuesday, May 4th, 2021 AT 10:54 AM
Tiny
RACEFAN966
  • MECHANIC
  • 5,029 POSTS
OK yea will have to lower the exhaust y pipe to get room here. Now what you can do is spray the bolts with brake fluid (I know sounds wierd). Then if it still runs start the truck and get it warm and then once warm spray them again and let it cool to the touch and they should come out. Let me know how it goes.
Was this
answer
helpful?
Yes
No
Tuesday, May 4th, 2021 AT 10:54 AM

Please login or register to post a reply.

Sponsored links