SPONSORED LINKS

2001 Ford Explorer hub assemblies

Tiny
TNT121
  • MEMBER
  • 2001 FORD EXPLORER
Drive Train Axles Bearings problem
2001 Ford Explorer 6 cyl Four Wheel Drive Automatic

I just replaced the front hub assemblies on my explorer. KNow when I start the vehical and turn the steeringwheel to a certain point the tires and steering wheel pulse back and forth. This happens sitting still or driving down the road. Any help would be appreciated.
SPONSORED LINKS
Sunday, February 15th, 2009 AT 9:16 AM

1 Reply

Tiny
JDTMMB
  • MEMBER
  • 5 POSTS
My '01 did identical "pulseing" I don't have the proper answer but I attributed it to disturbing the outer seals of the steering rack by letting the tie rods hang, possibly allowing a fluid bypass of sorts.
It quit after about a week of driving and "excersizing" the steering through the pulse zone. Good luck
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, March 7th, 2009 AT 1:30 AM

Please login or register to post a reply.

Related Bearing Hub Replace/Remove Content

Wheel Bearing Hub Replacement
VIDEO
Wheel Bearing Hub Replacement
Instructional repair video
Bearing Hub Replacement
GUIDE
Bearing Hub Replacement
A bearing hub is used to allow the wheel to rotate while supporting the weight of the car and is mounted to the front or rear of the suspension system. The hub consists of a...
VIEW MORE

Sponsored links