OIL PRESSURE LIGHT

if the light was not on before you changed the oil, it could be wrong weight oil, sludge build-up in oil pan and on pick-up tube or even oil pump going bad. chrysler says to use10w30 or the weight just below.
i hope this helped.

is the car running any different? bfore and after oil change.. knocking from motor at all??
Was it bought from private party or used lot??
Just wondering... but if it is knocking now let me know thnks jess s.

no no knocking in motor. and the owners manuel said 5w 30 but what i have saw since is the 10w 30 thanks. and not it isnt running any different. motor is real quiet as far as that goes.

and from a used lot. but we still havethe title and it was a one owner before i could check with them thanks for the thought.

that car has a common problem with the oil pressure sending unit.it has one wire although the plug to it is made for two wires.what you need to do is vent the empty part of the plug for the oil pressure sending by taking a thin pick and pushing it through the empty slot.then put a small tube like from a can of intake cleaner in it and wire tie it to the other wire.that should fix it.