1996 Chrysler Sebring Won't start

Tiny
CKRANDLE53
  • MEMBER
  • 1996 CHRYSLER SEBRING
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 168,000 MILES
There is no spark through the spark plugs. The starter turns over but won't fire. The rotor, cap, spark plugs and wires have all been changed. Also, the fuel pump and fuel filter are new. I am getting a P0113, and P0123 code on the diagnostic machine. Any ideas?
Friday, August 21st, 2009 AT 1:30 PM

2 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
The AIT and TPS has nothing to do with no spark-

No snapping blue spark continue to troubleshoot the ignition system-power input to the coil/coil packs, coil's resistances, distributor pick-up coil, ignition control module, cam and crank sensors- Note: If it doesn't apply disregard it
Was this
answer
helpful?
Yes
No
Saturday, August 22nd, 2009 AT 1:09 AM
Tiny
CKRANDLE53
  • MEMBER
  • 3 POSTS
Rasmataz thank you for your answer. I didn't think these codes were leading to the problem. My next move is to get to the coil. It is in a very difficult place to get in to, and I was hoping it was something easier to do. Have any ideas on how to get into the distributor on this car?
Was this
answer
helpful?
Yes
No
Saturday, August 22nd, 2009 AT 10:19 AM

Please login or register to post a reply.

Sponsored links