SPONSORED LINKS

1994 Chrysler LHS Belts and pulleys

Tiny
RHIANNA1
  • MEMBER
  • 1994 CHRYSLER LHS
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 146,000 MILES
I recently had work done on my tension pulley and timing belt. My check engine light keeps going on after I start my car more than 3 times a dat and my car will occasionally stall when stopped. I went under the hood today and noticed my air condition belt was sitting not connected next to my engine. Would that have anything to do with my timing being off and be the cause of my car stalling?
SPONSORED LINKS
Sunday, March 15th, 2009 AT 5:30 PM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Hi:
The AC belt won't affect the timing belt. However, if the check engine light is coming on, there is a code set in the computer that will identify the problem.

Take the car to a nationally recognized parts store and have them scan the computer for codes. The codes will identify where the problem is coming from.

Let me know what you find. Also, you should repair the AC belt problem.

Joe
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, March 17th, 2009 AT 1:24 PM

Please login or register to post a reply.

Related Engine Stall At Idle Content

Engine Stalls After Dead or New Battery
GUIDE
Engine Stalls After Dead or New Battery
So you installed a new battery and now the engine stalls? You have done nothing wrong because believe it or not this is normal. The engine computer has a learning cycle...
VIEW MORE

Sponsored links