2006 Chevy Cobalt I ned help with my 06 Cobalt

Tiny
KYLE1234
  • MEMBER
  • 2006 CHEVROLET COBALT
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 41,300 MILES
Hello, Im having some problems with my car. First off I started it this morning an its shaking out of control. I loked for anything out of the normal but I cant see anything. I figured id repace the spark plugs but the manual says good till 100k. I figured id do it anyway just to see what it helps. Whats the gap for this plus? The nam is AutoliteSpark plug #896893. I need help fast. This is my daily driver and I dont have much tim to work on it. It didnt do anything out of the normal yesterday and hasnt been anything prolonged so im really unsure I this will even help.
Thanks
-Kyle
Tuesday, December 30th, 2008 AT 12:18 PM

6 Replies

Tiny
KYLE1234
  • MEMBER
  • 4 POSTS
Ok well now ive tried the coil pack and still same problems and codes. Im still lost. Can someone please send me an answer!
Was this
answer
helpful?
Yes
No
Wednesday, December 31st, 2008 AT 6:05 PM
Tiny
BRIAN 1
  • MECHANIC
  • 1,030 POSTS
What are the codes?You put autolight plugs in?Those are pure garbage, put the gm ones back in. Aftermarket plugs cause more trouble. Scan for codes first, there are several possible fixes. Post back with what you find and will advise from there.
Was this
answer
helpful?
Yes
No
Wednesday, December 31st, 2008 AT 6:57 PM
Tiny
KYLE1234
  • MEMBER
  • 4 POSTS
The plugs were 6.49 ea. And they were platinums too. Ayway I cant remember for sure what the codes where but it was p0300-p0600, when I took it to the autozone close to my house it read multiple miss fires. Still not sure of the problem.
Thanks for the reply.
-Kyle
Was this
answer
helpful?
Yes
No
Thursday, January 1st, 2009 AT 11:19 AM
Tiny
BRIAN 1
  • MECHANIC
  • 1,030 POSTS
I need to know what cylinder of cylinders are missfiring.I also need to know exactly what codes. This could be a fuel problem not necessarly a spark problem. You have to do some testing, because if you don't it will be a guess to what is wrong. Throwing parts at this vehicle is expensive and foolish. There are bulletins and diagnostic trouble shooting for this vehicle. If you want me to help I will help, please post back with other questions.
Was this
answer
helpful?
Yes
No
Thursday, January 1st, 2009 AT 11:53 AM
Tiny
KYLE1234
  • MEMBER
  • 4 POSTS
Do you know how to check the code numbers without using the code scrubber tool for autozone? I know on the dodge neons all you have to do it turn the key 3 times and the codes will flash on the Odometer?
Was this
answer
helpful?
Yes
No
Thursday, January 1st, 2009 AT 11:57 AM
Tiny
BRIAN 1
  • MECHANIC
  • 1,030 POSTS
GM is a different breed, you can only check codes with a code reader or a tech 2, no other way to check.
Was this
answer
helpful?
Yes
No
Thursday, January 1st, 2009 AT 12:00 PM

Please login or register to post a reply.

Sponsored links