1994 Chevy Camaro cranks but wont start!

Tiny
CHEVY MAN4
  • MEMBER
  • 1994 CHEVROLET CAMARO
  • V8
  • 2WD
  • AUTOMATIC
  • 17,823 MILES
My car cranks but will not start, I scand the cumputer and got a code 36 witch is high res. Failure, my question is could the coil or module be the problem because the distributor is new !
Saturday, January 24th, 2009 AT 12:53 PM

2 Replies

Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
On the optical sensor, my info says, the low resolution signal is the rpm signal, without that, no spark or injector activity. The vehicle should start and run without the high resolution signal, but, there may be noticeable problems at higher rpms.

I'd check for B+ and ground at the distributor. Have you done any testing?
Was this
answer
helpful?
Yes
No
Saturday, August 17th, 2019 AT 5:04 PM
Tiny
CHEVY MAN4
  • MEMBER
  • 2 POSTS
No I did not do any testing yet, but before the no start condition stated the car would crank a long time before starting
Was this
answer
helpful?
Yes
No
Saturday, August 17th, 2019 AT 5:04 PM

Please login or register to post a reply.

Sponsored links