1980 Camaro stalls in gear

Tiny
SLYASH50
  • MEMBER
  • 1980 CHEVROLET CAMARO
Hey I recently replaced the engine from a 305 to a 350 bored.40 over it seems to want to stal when I put it in gear un less I give it gas to keep it alive. Also it wants to take off but when I push the gas it doesnt excelerate very fast. I was thinking torque converter?
Monday, May 15th, 2006 AT 10:41 AM

3 Replies

Tiny
LOSONE
  • MECHANIC
  • 1,616 POSTS
If it has a high stall torgue converter it may be the problem but on the offset it sounds like a carb problem to me.
Was this
answer
helpful?
Yes
No
Monday, May 15th, 2006 AT 5:30 PM
Tiny
SLYASH50
  • MEMBER
  • 2 POSTS
The torque converter is stock I was thinking I needed a higher stall like 2300 or so. Because it idles fun and what not but just when I put it in gear.
Was this
answer
helpful?
Yes
No
Monday, May 15th, 2006 AT 8:40 PM
Tiny
LOSONE
  • MECHANIC
  • 1,616 POSTS
It may idle funy because you might have a little more than stock cam. Funny idle is also caused by a vacuum leak. Good luck
Was this
answer
helpful?
Yes
No
Wednesday, May 17th, 2006 AT 7:50 AM

Please login or register to post a reply.

Sponsored links