Chevy S10 Blazer, Fuel Pump fuse

2010 CHEVROLET BLAZER
Avatar
LILCOUNTRYGAL
  • MEMBER
  • 1 POST
ECM B fuse blows when I try to start the blazer what could this be? The fuel pump does not run. It's an 86 Chevy S10 Blazer with a 2.8L v6 4x4 This is our only form of transportation at the moment so any help would be greatly appreciated.
Jan 21, 2007 at 11:41 PM
Advertisement
Avatar
CARUNDELL
  • ✓ASE Certified Mechanic
  • 602 POSTS
  • ASE Certified Mechanic
[quote:e5c3ff9d0d="lilcountrygal"]ECM B fuse blows when I try to start the blazer what could this be? The fuel pump does not run. It's an 86 Chevy S10 Blazer with a 2.8L v6 4x4 This is our only form of transportation at the moment so any help would be greatly appreciated.[/quote:e5c3ff9d0d]

Hey lil
there is an oil pressure switch in that circuit for the fuel pump. a quick test to see if its shorted is to disconn the oil pressure switch and "jumper it" if the fuel pump runs then the switch is shorted out and should be replaced. If the fuse still blows then there is a dead short in that circuit and needs further testing. Let us know!

Chris
Jan 22, 2007 at 11:45 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.