Hi, are you saying the gages don't work or you don't have any dash lites? Just to add, check 10 amp gage fuse, use a testlite. You shouldn't need to pull fuse, there should be a bare spot over each fuse leg. Use the testlite, one end of lite goes to chassis ground, metal part of vehicle, the pointed end, touch each fuse leg. Test with key on, if each fuse leg is hot, the lite comes on, showing that the fuse is good and there is voltage on the circuit.
SPONSORED LINKS
Sunday, February 21st, 2010 AT 1:25 PM