SPONSORED LINKS

2001 Cadillac Seville change brake pads sensor

Tiny
DLT56
  • MEMBER
  • 2001 CADILLAC SEVILLE
Brakes problem
2001 Cadillac Seville V8 Front Wheel Drive Automatic

I recently changed brakes and the change brake pads message is still on. How doI reset that?
Monday, April 6th, 2009 AT 11:13 AM

3 Replies

Tiny
FACTORYJACK
  • MECHANIC
  • 4,159 POSTS
Did you replace the sensors, they are on both front and rear.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, April 6th, 2009 AT 11:52 PM
Tiny
DLT56
  • MEMBER
  • 2 POSTS
No I did'nt replace the sensors.
Was this
answer
helpful?
Yes
No
Sunday, April 12th, 2009 AT 11:42 AM
Tiny
FACTORYJACK
  • MECHANIC
  • 4,159 POSTS
If they were down to 1mm or so, the sensor has worn through. Was it a change brake pads message that prompted you to replace in the first place? If so, you need to replace sensors on that axle. Inspect your brakes all four, and see if any of the sensors are contacting, disconnected, or have damaged wiring due to road debris/chains, or improper routing.
Was this
answer
helpful?
Yes
No
Tuesday, April 14th, 2009 AT 12:43 AM

Please login or register to post a reply.

Related Brake Pad Content

Brake Pads Wear Unevenly
GUIDE
Brake Pads Wear Unevenly
Uneven brake pads wear is a common problem with braking systems and can cause safety concerns. During any brake job when removing the brake pads you may notice that one...

Sponsored links