Cranks will not start

Hi and thanks for using 2carpros.com. Based on your description, it seems there is either a broken or damaged power supply or a ground issue.
First, here is a general overview of how an electrical system works:

https://www.2carpros.com/articles/how-a-car-electrical-system-works

You will need to test wiring using a test light or multimeter.

https://www.2carpros.com/articles/how-to-check-wiring

Now, I have attached a wiring schematic of the fuel system's electrical system. I would recommend starting at the relay to make sure there is power. If there is, you will need to then check for power at the pump itself. If there is no power, follow the supply back until you can locate where it is lost. It is not an easy job, but can be done.

I hope the schematic helps.

Thanks,
Joe

Hello,

These cars had problem with the crankshaft position sensor. Here is a guide to help you see what you are in for when doing the job:

https://www.2carpros.com/articles/crankshaft-angle-sensor-replacement

Here is the location for your car. Check out the diagrams (below). Please let us know what happens.

Cheers, Ken

Time to start checking the pink wires for power check the PCM power fuses and grounds. Here is a guide to help you get started:

https://www.2carpros.com/articles/how-to-check-wiring

Please run down these guides and diagrams and report back.

Cheers, Ken