SPONSORED LINKS

87 Toronado starting problems

Tiny
SLOWVW
  • MEMBER
  • 1987 OLDSMOBILE TORONADO
  • 3.8L
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 85,000 MILES
I have replaced alot of parts and I got no fire. Tested coil and module but have narrowed it down and ordered a Ecu but where is it located on the car?
Wednesday, March 23rd, 2016 AT 8:14 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
First scan for codes to see what may actually be wrong. It may be a crank sensor. You need to know if it's type 1 or type 2 type 1 has 3 coil towers on each side of engine.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Thursday, March 24th, 2016 AT 7:14 AM
Tiny
SLOWVW
  • MEMBER
  • 2 POSTS
Its a type 2 magnavox coil and I have replaced crank and cam sensor
Was this
answer
helpful?
Yes
No
Sunday, March 27th, 2016 AT 6:08 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Did you scan for codes? Here are some test sheets to check I think it's your ignition module may be bad as they used to go more often. Also check cranks sensor for rubbing it should have.030" clearance. Your ecm is in the right kick panel there is what is called a prom inside and that could be bad as well although kind of doubt it. New ecm may or may not have the prom and if it's replaced be very careful as it can be shorted out by removing and replacing even if ecm is out of car. Static electricity can short it out.
Images (Click to make bigger)
Thumb
Thumb
Thumb
Was this
answer
helpful?
Yes
No
+2
Monday, March 28th, 2016 AT 7:01 AM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links