Coolant leak

Tiny
RFERN245
  • MEMBER
  • 2005 GMC SIERRA
  • 5.3L
  • V8
  • 4WD
  • AUTOMATIC
  • 136,000 MILES
I was wondering if you could send me a link or list for your 5.3 build on YouTube. My truck has a coolant leak which I'm pretty sure is the poor casting from GM on the 5.3 heads. At this point I'm planning on just rebuilding the engine and only want to make 350-400 hp for my daily drive on 87 pump gas and so far have really enjoyed your guys video.
Tuesday, March 2nd, 2021 AT 4:36 PM

4 Replies

Tiny
RYAN L
  • ADMIN
  • 256 POSTS
Hello!

Thank you so much for watching! What list are you looking for? A playlist of all of the videos? Or a build list of all the parts? this guide can help

https://www.2carpros.com/articles/car-is-leaking-coolant

and

https://www.2carpros.com/articles/coolant-leak-symptoms

Thank you for using 2CarPros!

Best,
Ryan
Was this
answer
helpful?
Yes
No
Wednesday, March 3rd, 2021 AT 3:16 PM
Tiny
DUBS2017
  • MEMBER
  • 2 POSTS
Hey Ryan, jumping in here. Your YouTube videos are excellent, and is giving me to confidence to follow along on my own. A build list of all parts, tools, and lubricants needed would be an amazing addition to the videos. I would rather make one order and know that I will have everything needed for the rebuild.

Do you have something that you could share? My searching here on the site didn't turn anything up.

Thanks again for such detailed videos.

Dave
Was this
answer
helpful?
Yes
No
Tuesday, April 27th, 2021 AT 11:45 AM
Tiny
RYAN L
  • ADMIN
  • 256 POSTS
Hey there! Thanks so much for watching and coming on over to the site! So on the parts Summit is building us a page with all the parts used and that should be done soon. On tools I don't have a list handy but the only special tool was that oil pressure switch socket. The rest were typical mechanic's tools. For any lubricant situation on engine build I use Permatex Ultra Slick available on Amazon and Summit.

Thanks again for watching!

Best,
Ryan
Was this
answer
helpful?
Yes
No
+1
Tuesday, April 27th, 2021 AT 12:47 PM
Tiny
DUBS2017
  • MEMBER
  • 2 POSTS
Right on. Thanks Ryan. I'll keep an eye out for parts page on Summit's and your channels.

Keep up the good work!

Dave
Was this
answer
helpful?
Yes
No
Tuesday, April 27th, 2021 AT 12:48 PM

Please login or register to post a reply.

Sponsored links