VDC slip light

Tiny
LIGHTNINGBOLT
  • MEMBER
  • 2010 NISSAN ALTIMA
  • 52,000 MILES
VDC slip light comes on when you first take off. After you tune off the car and start it back up it goes off. It has happened three times lately.I was wondering if it could be in the brakes or a wheel bearing. Have you had this problem before.
Wednesday, November 6th, 2013 AT 10:35 AM

2 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
The VDC and Slip Light illumination could be an indication that you are getting low on brake fluid, due to worn brake pads. or you need to service the throttle actuator. here is a guide to help walk you through the brake brakes if needed and on how to service the throttle bore:

https://www.2carpros.com/articles/throttle-actuator-service

and

https://www.2carpros.com/articles/how-to-replace-front-brake-pads-and-rotors-fwd

Please run down these guides and report back.

Was this
answer
helpful?
Yes
No
-1
Sunday, November 10th, 2013 AT 12:38 PM
Tiny
JOOLSSD
  • MEMBER
  • 0 POST
The first guide fixed the problem for me. I had an issue with the brake fluid too but I added some I will do the brakes this weekend. Thanks
Was this
answer
helpful?
Yes
No
Thursday, April 30th, 2020 AT 11:53 AM

Please login or register to post a reply.

Sponsored links