DRIVER SIDE MIRROR AND FENDER REPLACEMENT
Mar 30, 2013 at 1:34 PM
2010 HYUNDAI ACCENT
ANONYMOUS
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
you'll likely have to remove the door panel to get to the bolt which hold the mirror on. (sometimes there is a triangle shaped panel opposite the mirror on the inside of the door that you can remove in order toget to these bolts.
the fender is pretty straight forward: open the hood, remove the bolt along the fenders top edge. remove the inner fender [above the tire]. unbolt the headlight assembly IF it is attached to the fender. unclip any wires or hoses and remove fender.
the fender is pretty straight forward: open the hood, remove the bolt along the fenders top edge. remove the inner fender [above the tire]. unbolt the headlight assembly IF it is attached to the fender. unclip any wires or hoses and remove fender.
Mar 30, 2013 at 1:51 PM
Advertisement