You have to slide the black plastic center piece of plastic on top of engine that says "Ecotec" to the right about quarter of inch, there is an arrow in the black plastic on the right hand side pointing which way to slide it. Then you have to put your fingers underneath that right handside of black cover and pull straight up and the cover pops right off. Then you have to take a Torx 40 size bit and unscrew the two screws holding in the coil. Then once screws are out pull the coil straight up and then directly below that coil are the four spark plugs.
SPONSORED LINKS
Thursday, February 17th, 2011 AT 11:55 PM