What size Allen wrench do I need to replace the front brake pads?
Jan 8, 2011 at 10:37 PM
brake pads and rotors
2008 FORD ESCAPE
TOPAZTR
- MEMBER
- 1 POST
Advertisement
BLUELIGHTNIN6
- ✓ASE Certified Mechanic
- 16,542 POSTS
9 mm torx socket. Here are the steps and a video
https://youtu.be/dlIUJOYnYQc
1. Before servicing the vehicle, refer to the Precautions Section.
2. Remove the wheel and tire assembly.
3. Remove the brake caliper clip.
4. Position the caliper aside.
5. Remove brake caliper bolt caps and the bolts.
6. Position the caliper aside and support.
7. Remove the brake pads.
8. Remove the outer brake pad from the anchor.
9. Remove the inner brake pad from the caliper piston.
10. To install, reverse the removal procedure
Please let us know if you need anything else to get the problem fixed.
https://youtu.be/dlIUJOYnYQc
1. Before servicing the vehicle, refer to the Precautions Section.
2. Remove the wheel and tire assembly.
3. Remove the brake caliper clip.
4. Position the caliper aside.
5. Remove brake caliper bolt caps and the bolts.
6. Position the caliper aside and support.
7. Remove the brake pads.
8. Remove the outer brake pad from the anchor.
9. Remove the inner brake pad from the caliper piston.
10. To install, reverse the removal procedure
Please let us know if you need anything else to get the problem fixed.
Mar 8, 2021 at 10:01 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.