2008 Dodge Caliber backfire

2008 DODGE CALIBER
65,000 MILES • 2.0L • 4 CYL • AUTOMATIC
Avatar
BAILER87
  • MEMBER
  • 2 POSTS
I have a dodge caliber that had a rough idle I cleaned the fuel system and when I went to start it back up it revved up on it's own and now it is idling really rough and backfire thru the air box and I have to stand on the brakes I checked the check engine light that came on and it said ignition coil I checked all 4 coil packs nothing changed when I took off number 3 so I replaced it and the plug but it is still doing it I don't know what else to do please help.
Dec 4, 2013 at 4:08 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
I would recommend checking for vacuum leaks and the idle air control valve (IAC). The IAC is responsible for maintaining the engine idle speed. As far as the #3 cylinder, if you remove the coil to it, nothing happens? Does the engine start to misfire?
Dec 4, 2013 at 5:21 PM
Avatar
BAILER87
  • MEMBER
  • 2 POSTS
When I remove the coil on 3 the idel dose not get any worse but when I rempve 1 2 or 4 it dose I checked for vacume leaks and cant find anything
Dec 5, 2013 at 6:14 PM
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
That tells me that #3 cylinder is not firing. Have you checked the plug? Have you checked for spark at the plug? If you have spark, have you checked the injector? If it is good, have you checked compression in that cylinder?
Dec 6, 2013 at 5:35 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.