SPONSORED LINKS

Camshaft position sensor location

Tiny
TATOR32
  • MEMBER
  • 1 POST
I have 2008 Malibu with the same 3.6. Cannot remember the code, but came up as cam shaft sensor. Pulled the front sensor out it was broken. So I replaced it and as soon as you crank the engine it breaks the new sensor. Hand crank the the engine and you can watch and feel it binding up. What could cause this or are there shims for the sensors?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, June 2nd, 2018 AT 5:33 AM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,513 POSTS
Please post your new question here:

https://www.2carpros.com/questions/new

Cheers, Ken
Was this
answer
helpful?
Yes
No
Saturday, June 2nd, 2018 AT 12:36 PM
Tiny
CHUCKVICTORIA
  • MEMBER
  • 1 POST
  • 2007 GMC ACADIA
  • 6 CYL
  • AUTOMATIC
  • 81,000 MILES
I'm trying to figure out what I need to replace. Getting 4 codes. I bought a cam sensor and plan on buying the other 3 to replace all 4, but if its something else I would like to know. Here are the codes: P0014, P0016, P0011P, P0016P. Hope you can help me and tell me what all I need to replace.
Was this
answer
helpful?
Yes
No
Thursday, February 28th, 2019 AT 1:34 PM (Merged)
Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
These codes are to do with cam timing problems, known as Camshaft Position Correlation,
I would be thinking that you have a timing chain problem. When the chains start to stretch with age, you will get the cam timing coming out of position, not to the point of doing damage, but enough to start setting codes, check for timing chain stretch first.
Was this
answer
helpful?
Yes
No
+2
Thursday, February 28th, 2019 AT 1:34 PM (Merged)
Tiny
EMILY PERSON-REAM
  • MEMBER
  • 3 POSTS
I have a 2007 GMC Acadia reading p0017 and p0024, is this a sensor issue. If so which one?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, March 27th, 2019 AT 4:59 PM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,513 POSTS
This can be caused by low/dirty engine oil or a broken timing chain guide how does the engine sound? Can you please shoot a quick video with your phone so we can hear the noise, that would be great. You can upload it here with your response. The p0017 is for a correlation issue im not sure a sensor will take care of it. If you like to try its the sensor for bank1.
Was this
answer
helpful?
Yes
No
+2
Thursday, March 28th, 2019 AT 11:34 AM
Tiny
EMILY PERSON-REAM
  • MEMBER
  • 3 POSTS
I will upload a video but basically engine sounds rough, when driving feels like it's losing power, I have a hard time starting it after putting gas in it. While driving sometimes it feels like it's misfiring and will kind of shutter and almost shake. But only last for a minute until I get accelerated.
Was this
answer
helpful?
Yes
No
+5
Thursday, March 28th, 2019 AT 3:32 PM
Tiny
EMILY PERSON-REAM
  • MEMBER
  • 3 POSTS
Could it be a crankshaft sensor?
Was this
answer
helpful?
Yes
No
Thursday, March 28th, 2019 AT 3:34 PM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,513 POSTS
It does not sound like it, if I could hear the engine I will know for sure. Also is the oil level good and clean?
Was this
answer
helpful?
Yes
No
Friday, March 29th, 2019 AT 11:33 AM
Tiny
SISCO385
  • MEMBER
  • 5 POSTS
Hello I have a 2008 outlook xr 3.6 I’m getting codes p0011 p0014 p0021 p0024 I have 4 sensors but I need the location for them
Was this
answer
helpful?
Yes
No
+1
Tuesday, April 30th, 2019 AT 10:30 AM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,513 POSTS
Please post your new question here, you must be logged in.

https://www.2carpros.com/questions/new

Cheers, Ken
Was this
answer
helpful?
Yes
No
Tuesday, April 30th, 2019 AT 2:32 PM
Tiny
SISCO385
  • MEMBER
  • 5 POSTS
I posted it there with video thanks
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, April 30th, 2019 AT 4:08 PM

Please login or register to post a reply.

Related Camshaft Camshaft Sensor Location Content

Sponsored links