Torque spec and sequence for the head bolts

Tighten the cylinder head bolts.
Tighten the M11 cylinder head bolts (1-10) a first pass in sequence to 30 N.m (22 lb ft).
Tighten the M11 cylinder head bolts (1-10) a second pass in sequence to 90 degrees using J 45059.
Tighten the M11 cylinder head bolts (1-10) a final pass to 70 degrees using J 45059.
Tighten the M8 cylinder head bolts (11-15) to 30 N.m (22 lb ft). Begin with the center bolt (11) and alternating side-to-side, work outward tightening all of the bolts.

Use an accurate torque wrench, a good torque-angle meter and new cylinder head bolts.

Here is a video to help

https://youtu.be/juOClONIWeY

You will find the sequence in the picture (attached) for the heads and intake

Hi Joanna,

They will be different. Please post your new question here, you must be logged in.

https://www.2carpros.com/questions/new

Cheers, Ken