2006 Ford Explorer Firing Order

V8 Firing Order: 1 3 7 2 6 5 4 8
V6 Firing order: 1-4-2-5-3-6
I included the diagrams below that include the Mountaineer firing order because while they are the same firing order the coils are numbered different. If you don't have the wires on the coils correct then the firing order will be off.
Please let us know if you need anything else.
Cheers, Ken
Drivers side grill to firewall is 5 6 7 8.
If you need to know coil pack wire position, I need to know if it is a 4.6 or 5.0 liter.
Suggested Repair
Recheck spark plug wire routing against the correct firing order and coil numbering for the installed engine. V6 order is 1-4-2-5-3-6; V8 order is 1-3-7-2-6-5-4-8. Match cylinder and coil positions to the diagram, since incorrect coil connections will throw off the firing order and can cause stalling, shaking, and a fuel smell.
Conversation Summary
The owner of a 2006 Ford Explorer asked for the correct spark plug firing order after plugs and wires were replaced and the engine stalled with a smell. Experts provided diagrams and listed the V6 order as 1-4-2-5-3-6 and the V8 order as 1-3-7-2-6-5-4-8, noting that coil numbering must also match. Later replies discussed other Explorer years and engines, including cylinder numbering and a 5.0L that shook after plug and cable replacement.








