SPONSORED LINKS

Throttle position sensor, throttle body reprogram

Tiny
OFACIO
  • MEMBER
  • 31 POSTS
And same codes
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:28 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
Started looking deeper for leaks and damage. Noticed my EGR was very dark and needed change. So I bought a brand new one. Properly installed it my self
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:28 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
It kept coming back. Look deeper. Nothised the PVC volve was not looking to good either bought a brand new one and properly installed it myself. Checked for and signs of leaks damage. Didn't see it could hear. I removed the EGR pipes conected to EGR pipe and motor. Looked fine just put new seals on both ends for insurance of no leaks.
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:28 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
Checked battery for proper voltage car off 12.46 good and on 14. Somthing. Meaning battery is working and alternator is doing is job
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
Someone told me is a new body throttle is installed reprogramming is requiered. Don't know how true that is but would like to know if that and issue. I never programmed the throttle. But it feel fine in the beginning and lighting volt comes. Like if is forgotten the throttle. Or something close to it
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
I need your engine size?So I can look into those codes. Also the throttle body I have only seen a throttle relearn not a programming. Let me know the engine size iam headed to church right now so I won't get back to you right away.
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
And again codes p0016 and p2112 keeps coming out. Question could code p0016 be related to throttle meaning lighting volt? Also I have a alarm on my car not factory would that affect the throttle? I had a system very loud on it and I took it out thinking it could have been the problem I was wrong. Last and final question. I have 22 star Inc rims on my car could the rims be affecting throttle? Meaning could the rims be to heavy for it?
Was this
answer
helpful?
Yes
No
-2
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
2.7
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
Ok sorry for the distraction on your important visit to church speak with when your done. And thanks
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
The code p0016 top fix is a bad cam sensor then you could have a timing belt that jumped. As far as the P2112 goes there aren't any repair tips top fixes etc there isn't any I see in my repair info. It says the throttle plate doesn't give feed back to where it's supposed to on start up.
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
So where I stand with this harrable issue im having fixing this 0016 could it salve 2112
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
They look like two separate issues I don't see how there related PLease answer my question how quickly does the code p0016 reset after you clear it?Iam not there to see anything for my self. Do you have a multi meter to do some testing?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
Yes I have a meter and code reader.
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
Once erasing the codes p0016 come right back like 2min after engine start up
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
O for got to mention I bought a new sensor for the code 0016
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
It still came on
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
Code I mean, I checked the wire harness for the sensors it has volt coming out of it
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
So don't really know if it could be the brand new sensor or timing chin or camshaft
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
So you replaced the cam sensor?You never mentioned that before.
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)
Tiny
OFACIO
  • MEMBER
  • 31 POSTS
Yeah I did
Was this
answer
helpful?
Yes
No
Tuesday, February 12th, 2019 AT 6:29 PM (Merged)

Please login or register to post a reply.

Related Throttle Position Sensor Replace/Remove Content

VIEW MORE

Sponsored links