Not going into gear?

Tiny
KIRA MORRISON
  • MEMBER
  • 2005 NISSAN PATHFINDER
  • TURBO
  • AUTOMATIC
I bought the vehicle listed above turbo diesel. I had an intermittent starting problem I got told to replace the ignition barrel. So I replaced that then got told that the TCM chip was fried. So I replaced that and now the car isn't selecting gears. I was wondering what the problem is?
Friday, September 18th, 2015 AT 3:57 AM

1 Reply

Tiny
KASEKENNY
  • MECHANIC
  • 18,907 POSTS
This is a couple possible issues. First and foremost we need to check the fluid level and service the transmission if the fluid is not in good condition.

https://www.2carpros.com/articles/how-to-service-an-automatic-transmission

If that does not solve the issue then we need to review this guide and start working through the issues.

https://www.2carpros.com/articles/automatic-transmission-problems

Start with checking for codes and make sure we don't have any. Here is a guide for that as well:

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

Let's run through this and go from there. Thanks
Was this
answer
helpful?
Yes
No
+1
Tuesday, December 15th, 2020 AT 2:32 PM

Please login or register to post a reply.

Sponsored links