No electrical power?

Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
I'd have to be sure the battery has a full charge and the charging system is working ok. If the battery is down, you can't do any testing.

Use a digital multimeter across battery posts, everything off, what is the reading? 12.6 volts is the generic spec for a full charge. Leave the meter leads on the battery, have helper turn key to crank, usually the voltage shouldn't below 10 volts, much below that and the computer may not work.
Was this
answer
helpful?
Yes
No
Thursday, May 13th, 2021 AT 7:59 PM (Merged)
Tiny
DESTINY
  • MEMBER
  • 1 POST
  • 1995 CHEVROLET SILVERADO
  • 121,866 MILES
I have no power after I replced battery and stater
Was this
answer
helpful?
Yes
No
Thursday, May 13th, 2021 AT 7:59 PM (Merged)
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,758 POSTS
Make sure the battery terminals are clean, tight, and the cables are in good condition. Check ground from battery to engine block to make sure it is tight and clean. Check main fuses under the hood in power distribution box. I am assuming that there is nothing is working.
Was this
answer
helpful?
Yes
No
Thursday, May 13th, 2021 AT 7:59 PM (Merged)
Tiny
DIGIVIEW74
  • MEMBER
  • 3 POSTS
  • 1988 CHEVROLET SILVERADO
  • V8
  • 2WD
  • AUTOMATIC
My 1988 Chevy Silverado 1500 short circuited when I charged the battery and connected the truck's positive battery cable before disconnecting the chargers negative cable from the battery's negative post. Smoke came out of a part attached to the chassis of the truck. It has 5 screws with nuts which has cables attached to it. The truck dome lights work, but nothing else works. Does anyone know what could have burned out?
Was this
answer
helpful?
Yes
No
Thursday, May 13th, 2021 AT 7:59 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Possibley some fuse links do you have a pic of what was smoking?
Was this
answer
helpful?
Yes
No
+1
Thursday, May 13th, 2021 AT 7:59 PM (Merged)
Tiny
DIGIVIEW74
  • MEMBER
  • 3 POSTS
Here is a picture
Was this
answer
helpful?
Yes
No
-1
Thursday, May 13th, 2021 AT 7:59 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
I posted a couple of wire diagrams follow the wires make sure you have power to them and check the fuse able links in the diagrams.
Was this
answer
helpful?
Yes
No
+1
Thursday, May 13th, 2021 AT 7:59 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Also have you checked all the fuses inside and out?Thats another thing you need to check.
Was this
answer
helpful?
Yes
No
Thursday, May 13th, 2021 AT 7:59 PM (Merged)
Tiny
DIGIVIEW74
  • MEMBER
  • 3 POSTS
There we go one of the wires burned out & was not conducting electricity. Thank you for your great insight into this issue.
Was this
answer
helpful?
Yes
No
Thursday, May 13th, 2021 AT 7:59 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Your welcome anytime glad to hear you got it fixed.
Was this
answer
helpful?
Yes
No
Thursday, May 13th, 2021 AT 7:59 PM (Merged)

Please login or register to post a reply.

Sponsored links