2004 Pontiac Aztek Heat Problem

Tiny
MRM0919
  • MEMBER
  • 2004 PONTIAC AZTEK
  • 3.4L
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 110,000 MILES
Could get no heat and found out the radiator was plugged pretty bad, so I have replaced the radiator, thermostat and heater core. Now I get some warm heat when running heater but not real hot and I get good air blowing when switching control to defrost but it stays cold. No heat. Not even warm air. Any suggestions?
Saturday, November 22nd, 2014 AT 1:25 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
L hvac fuse inside car it may reset your actuators item 2 and 5 in pic. These control heat/ac. Pull fuse with key on for 60 seconds then reinstall. Otherwise you'llneed to see if actuators are getting power.
Was this
answer
helpful?
Yes
No
-1
Saturday, November 22nd, 2014 AT 4:00 PM
Tiny
MRM0919
  • MEMBER
  • 3 POSTS
Thanks so much! I plan to try this tomorrow and will let you know the results.
Was this
answer
helpful?
Yes
No
Saturday, November 22nd, 2014 AT 5:25 PM
Tiny
MRM0919
  • MEMBER
  • 3 POSTS
Pulled fuse per your suggestion and no change. Will need to find out if actuators are getting power. Thanks for the suggestion.
Was this
answer
helpful?
Yes
No
+1
Sunday, November 23rd, 2014 AT 5:15 PM

Please login or register to post a reply.

Sponsored links