Transmission not working properly

Tiny
DUANE HALLENBACK
  • MEMBER
  • 2003 CADILLAC CTS
  • 6 CYL
  • 162,000 MILES
I was driving and came to a stop and transmission had no more gears just went limp.
Sunday, February 6th, 2022 AT 12:55 PM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,645 POSTS
Hi,

When you say it went into limp, were you still able to drive it at a regulated speed or do you mean the vehicle went into neutral ("No more gears") and nothing worked?

Do you have a scan tool? In this case, the best thing to start with would be a can-scan. CAN stands for controller area network. Basically, the different computers/modules are tied together via a few wires. This will receive codes regardless of the module storing them. Here is a link that shows how it's done:

https://www.2carpros.com/articles/can-scan-controller-area-network-easy

Also, have you checked the fluid level and condition?

https://www.2carpros.com/articles/how-to-check-and-add-transmission-fluid

Let me know.

Joe
Was this
answer
helpful?
Yes
No
Sunday, February 6th, 2022 AT 8:48 PM
Tiny
DUANE HALLENBACK
  • MEMBER
  • 2 POSTS
Joe, I put on scan tool I have 2 oxygen sensor codes nothing for transmission. On radio scene 2 codes are: 25752111 9093
Msm25739645. 1676.
Was this
answer
helpful?
Yes
No
Wednesday, February 9th, 2022 AT 4:56 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,645 POSTS
Hi,

The codes you have are indicators that the PCM has stored codes. You should be able to further investigate that. Are you able to scroll through the screen and locate ECM? If so, select it and it should provide what is stored.

Also, the scan tool you used can read the CAN codes, correct?

Let me know.

Joe
Was this
answer
helpful?
Yes
No
Wednesday, February 9th, 2022 AT 6:18 PM

Please login or register to post a reply.

Sponsored links