The easiest thing to do is to remove the shroud then the cooling fan assembly. Once it is out, then you can access the motor much easier.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Tuesday, May 3rd, 2011 AT 1:23 PM
HOGMANMIKE
MEMBER
16 POSTS
This is how I did it, works fairly well, too bad it didn't fix the problem
Was this
answer
helpful?
Yes
No
+3
Wednesday, May 4th, 2011 AT 1:08 AM
JACOBANDNICKOLAS
MECHANIC
109,755 POSTS
Can you tell me what is happening?
Was this
answer
helpful?
Yes
No
+1
Wednesday, May 4th, 2011 AT 3:04 AM
HOGMANMIKE
MEMBER
16 POSTS
Cooling fan does turn but, very slowly and does not speed up any with a/c switched on, I did replace the fan motor with a brand new Ford part. It only gets hot when standing still, like a traffic jam or just idling, does ok on the road ( air is forced thru the radiator)
Was this
answer
helpful?
Yes
No
+4
Wednesday, May 4th, 2011 AT 3:11 AM
HOGMANMIKE
MEMBER
16 POSTS
I also borrowed a tester ( Snap-on scanner) and ran the Ford "star test" on the car, got no codes, and it said "fan speeds" good with KOER test. Fan did not speed up
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, May 4th, 2011 AT 3:14 AM
JACOBANDNICKOLAS
MECHANIC
109,755 POSTS
Have you checked for excessive resistance in the wiring to the blower motor? Ground?
Was this
answer
helpful?
Yes
No
Wednesday, May 4th, 2011 AT 12:09 PM
HOGMANMIKE
MEMBER
16 POSTS
How could this have any affect on the cooling fan?