Fault is with the Throttle Position Sensor. Testing have to be done before replacing component.
KOER & Continuous Memory DTC P1121: Check Rationality Operation Between TP & MAF Sensors
This DTC is set when the comparison between TP and MAF sensor readings are not consistent with calibrated load values during KOER self-test. Possible causes for this fault are:
†Air Leak Between MAF Sensor & Throttle Body
†TP Sensor Not Seated Fully
†Faulty TP Sensor
†Faulty MAF Sensor
SPONSORED LINKS
Friday, March 11th, 2011 AT 12:55 PM