SPONSORED LINKS

2001 Chrysler PT Cruiser CAM/CRANK WILL NOT SYNC

Tiny
DR LOOT
  • MECHANIC
  • 2,311 POSTS
Have you had your new PCM flashed by the dealer?
Was this
answer
helpful?
Yes
No
-1
Monday, March 16th, 2015 AT 7:40 AM
Tiny
BORIS2468
  • MEMBER
  • 11 POSTS
NO I DID NOT HAVE A DEALER FLASH THE NEW OR OLD PCM. THE NEW PCM WAS FLASHED BY THE COMPANY THAT I BOUGHT IT FROM.

AS I ALLREADY STATED THE SENT THE NEW PCM BACK TO THE COMPANY THAT I BOUGHT IT FROM & THEY RECHECKED THE PCM & SAID EVERYTHING WAS WORKING FINE.

ALSO AS I STATED I HAVE HAD BOTH PCM;S IN THE VEHICLE SEVERAL TIMES SENSE ALL THE WORK WAS DONE.

I AM TAKING THE SCOPE READING ABOUT 4 INCHES FROM THE SENSOR, & I DO NOT SEE HOW THE PCM COULD BE CAUSING THE PROBLEM OF PART OF THE SQUARE WAVE DROPPING OUT.

I HAVE GOOD VOLTAGE & GROUND GOING TO THE CAM SENSOR & I AM READING THE SIGNAL, THE SQUARE WAVE COMING OUT OF THE SENSOR.

YOU WILL HAVE TO EXPLAIN TO ME HOW THE PCM IS CAUSING A PROBLEM WITH THE CAM SIGNAL, THE SQUARE WAVE, BEFORE THE SIGNAL GETS TO THE PCM.

THANKS AGAIN JOHN
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Wednesday, March 18th, 2015 AT 6:26 AM

Please login or register to post a reply.

Related Engine Not Cranking Over Content

Starter Not Working
GUIDE
Starter Not Working
This guide is designed to help you identify whether the issue with your non-working starter motor is due to an electrical problem or a fault within the starter motor itself...
VIEW MORE

Sponsored links