2001 Buick Regal O2 sensor

Tiny
CHINESE FOOD
  • MEMBER
  • 2001 BUICK REGAL
  • 136,000 MILES
I had the exhaust resonator replaced and the check engine light came on shortly afterwards. I replaced the o2 sensor on the manifold and the o2 sensor is still showing incomplete on the mechanics engine scanner. Should I replace The o2 sensor after the converter?
Monday, September 9th, 2013 AT 12:09 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
What is the code and what engine size? You may have replaced the wrong one.
Was this
answer
helpful?
Yes
No
Monday, September 9th, 2013 AT 12:14 PM
Tiny
CHINESE FOOD
  • MEMBER
  • 7 POSTS
It's a 3.8L Supercharge. No code is showing. It's just telling him that the 02 sensor and evap is Inc. I downloaded the info you have already emailed me and he wouldn't even look at. I'm frustrated and confused. I can't figure this problem out
Was this
answer
helpful?
Yes
No
Monday, September 9th, 2013 AT 12:22 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Is this the one with the monitor problem? I thought that it was explained to you if you can't get satisfaction at your shop then go to another place. That may be a problem with the ecm or a bunch of other things, air leaks will also set that code since you've had the resonator replaced it may have one.
Was this
answer
helpful?
Yes
No
Monday, September 9th, 2013 AT 12:26 PM

Please login or register to post a reply.

Related Oxygen Sensor Replace/Remove Content

Oxygen Sensor Replacement
VIDEO
Oxygen Sensor Replacement
In­struc­tional re­pair video
Oxygen Sensor Replacement
GUIDE
Oxygen Sensor Replacement
An oxy­gen or lambda sen­sor is used to de­ter­mine the en­gine ex­haust mix­ture which can then be con­trolled by the com­puter. These sen­sors are equipped with a heater that can...
VIEW MORE