SPONSORED LINKS

Around 67-70 MPH my car will have a very harsh.

Tiny
DPETEGRANDAM2000
  • MEMBER
  • 2000 PONTIAC GRAND AM
  • 190,000 MILES
Around 67-70 MPH my car will have a very harsh vibration, will only happen when the car is between 2300-2500 rpm, right outer tie rod and right wheel bearing have been replaced. When above or below those speeds the vibration isn't there, also at those speeds with above or below rpms there is no vibration. Any ideas?
SPONSORED LINKS
Tuesday, November 20th, 2012 AT 7:04 AM

2 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Wheel balance?

Is it engine, trans or front end related. More info please

Roy
Was this
answer
helpful?
Yes
No
Tuesday, November 20th, 2012 AT 11:25 AM
Tiny
DPETEGRANDAM2000
  • MEMBER
  • 2 POSTS
I do believe it is front end related. Nothing from the engine or trans would cause this kind of vibration under such weird conditions, at least in my opinion, but any suggestion is going to be taken seriously, I need this fixed soon. Im going to try to have wheels balanced and rotated to see if that helps
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, November 20th, 2012 AT 3:54 PM

Please login or register to post a reply.

Related Tie Rod End Replace/Remove Content

Tie Rod End Replacement
GUIDE
Tie Rod End Replacement
EV's and gas power cars are equipped which tie rod ends which is needed to connect the rack and pinion or steering box to the spindle and front wheels that control the...
VIEW MORE

Sponsored links