SPONSORED LINKS

2000 Mitsubishi Eclipse I need some help

Tiny
LOVERBOYT
  • MEMBER
  • 2000 MITSUBISHI ECLIPSE
  • 3.0L
  • V6
  • FWD
  • AUTOMATIC
  • 136,372 MILES
Okay here is my problem, hopefully you can help me. I crank my car it drives just fine, almost like a brand new car. Once I get to a stop sign or a red light it just dies. I cleaned out the MAF sensor the throttle body intake and the IAC valve. I even bought a new battery and battery post to be safe. What could be the cause of the car constant dying?
SPONSORED LINKS
Saturday, July 26th, 2014 AT 11:39 PM

1 Reply

Tiny
CARADIODOC
  • MECHANIC
  • 33,864 POSTS
You have to add some details. To be specific, does the engine stay running if you hold the accelerator pedal down 1/4"? If it does, this is caused by disconnecting the battery or letting it run dead. When you replaced the battery, the Engine Computer lost its memory. It has to relearn "minimum throttle" before it will know when it has to be in control of idle speed.

To meet the conditions for the relearn to take place, drive at highway speed with the engine warmed up, then coast for at least seven seconds without touching the pedals.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, July 27th, 2014 AT 1:51 AM

Please login or register to post a reply.

Related Idle Air Control Content

Idle Air Control Clean
VIDEO
Idle Air Control Clean
Instructional repair video
Idle Air Control Valve Service
GUIDE
Idle Air Control Valve Service
The idle air control valve is responsible for controlling the engine idle speed via the car's PCM (computer). These valves are configured differently depending on...
VIEW MORE

Sponsored links