Shifting problem

2000 ACURA INTEGRA
112,000 MILES • 4 CYL • FWD • MANUAL
Avatar
EMZMCGEE
  • MEMBER
  • 1 POST
Sstarting yesterday it became more difficult to shift gears. Today, from a complete stop it took me quite a few tries before I could get it into first and I really have to work to get it there. The clutch also feels a bit different than I'm used to, it feels like I have to push it in farther before it catches. I'm hoping this doesn't mean a new clutch is in order for me?
Dec 31, 2010 at 3:25 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HONDAMIKE
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 71 POSTS
It could be a leaking Clutch master or slave. Check the fluid to see if it is low. Also, look at the back of the clutch master for fluid leak (under dash on driver's side firewall). Also check for fluid loss at the clutch slave cylinder. If either is leaking, I suggest replacing both since they work together.
Dec 31, 2010 at 3:57 AM
Advertisement