SPONSORED LINKS

99 S-10 2.2 head gasket

Tiny
ROWDYZ
  • MEMBER
  • 1999 CHEVROLET S-10
  • 4 CYL
  • 2WD
  • MANUAL
A friend of mine asked me to do a head gasket for him on his s 10. The curious thing he said was that anti-freeze was coming out by the #3 cylinder. After I pulled the head off I could see alot of wear on the head gasket but nothing to indicate a leak otherwise. Does anyone have a thought as to what it might have been?
SPONSORED LINKS
Monday, March 14th, 2011 AT 5:18 PM

7 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
It could have a cracked block or head. Is he sure it was coming out in that area? Could it have been a bad freeze plug?
Was this
answer
helpful?
Yes
No
Wednesday, April 6th, 2011 AT 12:34 PM
Tiny
ROWDYZ
  • MEMBER
  • 6 POSTS
I dont see a freeze plug in that area.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, April 6th, 2011 AT 7:54 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
If it was coming out by the #3 cylinder, there really isn't anything other there. How high on the engine was the coolant? Also, is he sure it was the #3 cylinder? Could a hose or anything else in that area have leaked or sprayed?
Was this
answer
helpful?
Yes
No
Wednesday, April 6th, 2011 AT 10:32 PM
Tiny
ROWDYZ
  • MEMBER
  • 6 POSTS
Well I replaced the head (and gasket) and now it has no spark. So until I have it running I won't know if it still leaks.
Was this
answer
helpful?
Yes
No
Thursday, April 7th, 2011 AT 8:58 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Let me know what you find. As far as spark, make sure the crank sensor wasn't damaged or left disconnected during the work. Also, make sure you have power to the coil.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, April 8th, 2011 AT 2:22 AM
Tiny
ROWDYZ
  • MEMBER
  • 6 POSTS
Well I found out today there is no compression 60psi. In all cylinders. Looks like its time for a new motor.
Was this
answer
helpful?
Yes
No
Friday, April 8th, 2011 AT 8:48 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
That isn't good. Not even enough to run. I bet the head was warped.
Was this
answer
helpful?
Yes
No
Saturday, April 9th, 2011 AT 4:05 AM

Please login or register to post a reply.

Related Cylinder Head Gasket Leak Content

VIEW MORE

Sponsored links