You can run a self-diagnostic test.
Phase 1
Run engine to normal temperature.
Turn ignition switch to OFF.
Set transmission mode switch to AUTO, overdrive switch to ON and selector lever to P.
Turn ignition switch to ON, but do not start engine.
POWER indicator light should come on for 2 seconds.
Phase 2
Turn ignition switch to OFF.
Move selector lever to D, over drive switch to OFF.
Turn ignition switch to ON, but do not start engine.
Move selector to "2" position, set overdrive switch to ON, move selector to "1", set overdrive switch to OFF.
Press accelerator to the floor and release.
Record POWER light flashes.
Come back with the codes and I'll look them up on the chart.
Tuesday, August 4th, 2020 AT 5:41 PM
(Merged)