SPONSORED LINKS
Tuesday, December 14th, 2010 AT 11:13 PM
ANNOYED626
- MEMBER
- 1998 MAZDA 626
- 6 CYL
- FWD
- AUTOMATIC
- 151 MILES
My CEL was on, so I ran the codes. P0400, no surprise there. Replaced the EGR valve, cleaned the EGR ports and the CEL went off. It came back on with # codes. P0113, P1131 and p1151. Replaced the IAT, cleared the codes again. IM gasket leak, replaced gasket. I still Have a "vacuum" leak. I think. Vacuum hoses checked and none leaking. CEL back on now, rough idle, odd acceleration, stalls, smoking under hood. And the once again dreaded p0400. I was told the EGR vacuum solenoid could be bad. Checked what I was told was the vacuum solenoid. Works fine. I am at a loss as to where to go from here. Oh, and white smoke is comming from under hood.
