Just after a bit of help regarding a.

Tiny
ANONYMOUS
  • MEMBER
  • 1998 FORD FALCON
  • 230,000 MILES
Hi,
Just after a bit of help regarding a high idle problem
I'm having with my EL Falcon, This is whats happening when started the idle sits at 2000rpm give it a rev and it will hold at 2500 once warm it will stay at 2700 when I unplug ics it drops by 500 unplug vac from map sensor and it will down by 800rpm but runs very rich.
The work I have done so far is inspected vac lines including brake booster hose swaped icp map and ecu from my other el tightened intake manifold swaped o2 sensor cleaned the throttle body and checked pvc all were good but the problem still exist's any help would be great. Thanks
Tuesday, April 9th, 2013 AT 11:27 AM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Clen your throttle plate on both sides with choke cleaner as well as iac hole and iac the check for a vacuum leak spray choke cleaener around intake if rpm changes you found your leak
Was this
answer
helpful?
Yes
No
-1
Tuesday, April 9th, 2013 AT 12:55 PM

Please login or register to post a reply.

Sponsored links