ABS lite on, will not shift out of first, code tester w/n test

Tiny
KEBBLER69
  • MEMBER
  • 1998 CHEVROLET S-10
  • 145,000 MILES
Checking sensors for bad gas milage, check vss sensor book says 5 volts nothing good ground, code tester 4.5v to connector but tester hook nothing, shifting probleming just starting after messing with vss and iac valve please help, dazed and confused:(
Thursday, October 27th, 2011 AT 10:12 PM

50 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
What codes do you have?A basic code reader wont read abs codes most of the time. What brand and model code reader do you have?
Was this
answer
helpful?
Yes
No
+1
Thursday, October 27th, 2011 AT 11:18 PM
Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
I tried my friends and auto zone neither work, would abs lite have something to to do with the vss? Tried reset computer by removing battery power no luck
Was this
answer
helpful?
Yes
No
Thursday, October 27th, 2011 AT 11:28 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
The vss would effect the transmission shifting not the abs the scanner at auto zone I doubt reads abs codes. So when you hook up a scanner what happens it doesnt power up off the obd2 connector no commicationwith car etc?
Was this
answer
helpful?
Yes
No
Thursday, October 27th, 2011 AT 11:36 PM
Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
Does not power up, how to ck vss?
Was this
answer
helpful?
Yes
No
Thursday, October 27th, 2011 AT 11:39 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
If the scan tool doesnt power up off the connector you most likely have a blown fuse thats the first thing I would check. The inside fuse box the fuse is labeled cigar Ltr see if it has power to both sides of that fuse. The vss is tested with a multimeter lets start by checking the fuse and getting the codes.
Was this
answer
helpful?
Yes
No
Thursday, October 27th, 2011 AT 11:53 PM
Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
I should told u fuse r good, had powervolts12 at lighter
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 12:03 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Your sure that fuse is good otherwise your next step will be tracing the orange wire at the obd2 connector.I would hate to see you trace that wire for nothing. Alright next see if the orange wire at the obd2 connector has battery voltage.
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 12:09 AM
Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
Ck them 3 times, obd2, code tester contecter has 4.3 volts
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 12:13 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Obd2 connector where the scan tool hooks up. Are you grounding the meters black lead to chassis ground and not the ground on the connector?And hooking the red meter lead to the orange wire at the connectorand getting 4.3 volts?Because thats a strange reading.
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 12:21 AM
Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
Both ways 4.4 volts?
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 12:29 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Your going to have to trace the orange wire back and see where the problem is causing the low voltage reading. Thats where I would start so then you can scan for codes.
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 12:40 AM
Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
K, where does it end up? Thanks for the help, any more info anytime will help thanks again, shifting problem? Abs lite?
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 12:47 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
The orange wire goes back to the inside fuse box to the cigar Ltr fuse. As far as the shifting and the abs we have to get the obd2 connector working battery votage etc. So we can get the codes otherwise we will just be guessing and wasting time.
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 1:13 AM
Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
K, talk to tommrow, thanks again
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 1:19 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Your welcome keep me posted.
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 1:24 AM
Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
Have 12v to fuse box and lighter, where next check?
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 4:15 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
You have to start at the obd2 connector follow the orange wire back to the inside fuse box testing the voltage as you go along till you find the problem.
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 5:23 AM
Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
Is there a wiring digram I can use 4 this the book does not show very much?
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 8:41 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
At this point a wire diagram is only going to show the orange wire running from the obd2 connector to the inside fuse box. It wont show what path it takes to get there thru the dash. Your just going to have to test the voltage as you follow it back to the inside fuse box.
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 3:46 PM
Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
Got tester working and had 8 codes cleared and did not come back, still w/n shift out of first and abs lite still comes on when driving, getting no pwr to vss sensor?
Was this
answer
helpful?
Yes
No
Friday, October 28th, 2011 AT 4:06 PM

Please login or register to post a reply.

Sponsored links