SPONSORED LINKS

1997 Toyota Tacoma front brake rotors

Tiny
JAPCRAP
  • MEMBER
  • 1997 TOYOTA TACOMA
  • 2.4L
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 195 MILES
Rotor assembly sticks to rotor even after the 5 bolts are removed (rotor and assembly are completely removed from the axle). Do I need to spray the assembly down with WD40 and pound it off with a hammer, or is there a better less primitive way.
Thursday, May 15th, 2014 AT 10:14 AM

1 Reply

Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Hi
Caliper is held on spindle by two bolts coming in from rear ie. Toward engine then it will slide off rotor. Rotor stays mounted to spindle. Not sure what 5 bolts you removed see diagram maybe it will help
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, May 15th, 2014 AT 10:33 AM

Please login or register to post a reply.

Related Brake Rotor Content

Rotor Stuck on Hub/Axle
GUIDE
Rotor Stuck on Hub/Axle
Much like a rear brake drum that gets stuck to the axle flange, a brake rotor is subject to the same type of problem due to the fresh metal on both the brake rotor and the...
VIEW MORE

Sponsored links