Power loss and engine shut down?

Tiny
DOGWATCH21
  • MEMBER
  • 1996 TOYOTA TACOMA
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 21 MILES
1996 Toyota Tacoma. L4 - 2.4L vin L 2438 cc. After engine reaches operating temp, Engine cuts out and misfires randomly. RPMS drop until engine stalls. Sometimes if you feather the pedal, you can keep it running but never recovers. My diagnostic machine says the engine running lean on bank one along with the random misfire codes. What do you think could be the cultrate here?
Wednesday, January 26th, 2011 AT 4:41 PM

1 Reply

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
I have seen the MAF sensor go out and cause this issue and leave no code for it, here is the sensor location and a guide to go over so you can understand more of what's going on.

https://www.2carpros.com/articles/repair-lean-mixture-codes-p0171-or-p0174-on-some-manufacturers

and

https://www.2carpros.com/articles/engine-stalls

Check out the images (Below). Please let us know what happens.

Was this
answer
helpful?
Yes
No
+2
Tuesday, March 15th, 2011 AT 11:51 PM

Please login or register to post a reply.

Sponsored links