Just changed the IAC and TPS on my car with a 3.1. Now the car won't start
GUSHER3137
MEMBER
1996 PONTIAC GRAND PRIX
136,000 MILES
I removed the negative battery cable while installing and cleaned the throttle body while I had it apart.
Sunday, September 4th, 2011 AT 7:41 PM
7 Replies
DOCFIXIT
MECHANIC
18,828 POSTS
Won't crank or fire?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, September 4th, 2011 AT 7:57 PM
GUSHER3137
MEMBER
4 POSTS
It will crank. No fire
Was this
answer
helpful?
Yes
No
Sunday, September 4th, 2011 AT 8:03 PM
DOCFIXIT
MECHANIC
18,828 POSTS
So starter does not operate?
Was this
answer
helpful?
Yes
No
Sunday, September 4th, 2011 AT 8:42 PM
GUSHER3137
MEMBER
4 POSTS
It cranks and turns over but the engine will not start.
Was this
answer
helpful?
Yes
No
Sunday, September 4th, 2011 AT 8:46 PM
DOCFIXIT
MECHANIC
18,828 POSTS
Spray CARB cleaner in throttle body crank see if it fires
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, September 4th, 2011 AT 8:49 PM
GUSHER3137
MEMBER
4 POSTS
No Luck. Pulled the plug wire off and I have no spark. Double checked fuses and all the wire connections. Also, checked for codes. No Codes.
Was this
answer
helpful?
Yes
No
Sunday, September 4th, 2011 AT 10:28 PM
RASMATAZ
MECHANIC
75,992 POSTS
No snapping blue spark continue to troubleshoot the ignition system-power input to the coil/coil packs, coil's resistances, distributor pick-up coil, ignition control module, cam and crank sensors and computer Note: If it doesn't apply disregard it.