SPONSORED LINKS

1996 GMC Jimmy no responce to ignition

Tiny
JAMISONHOWELL
  • MEMBER
  • 1996 GMC JIMMY
  • 200,000 MILES
But starter has power and solenoid works no power at fuse block checked all wires no breajs or shorts in harness need to know where and what could be stoping power to ignition switch and fuse panel
Monday, November 18th, 2013 AT 5:04 PM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
If you have no power to the ignition switch itself, have you checked the main fuses under the hood?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, November 18th, 2013 AT 5:23 PM
Tiny
JAMISONHOWELL
  • MEMBER
  • 2 POSTS
Check all the fuses and relays and all are fine there is and aftermarket theft system in it called prolock could that be it? It looks like its just tied into ignition switch
Was this
answer
helpful?
Yes
No
Monday, November 18th, 2013 AT 8:41 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Yes, that could be an issue. However, I am not familiar with that system. Some of these are designed to shut down the power so the car won't start.
Was this
answer
helpful?
Yes
No
Tuesday, November 19th, 2013 AT 5:22 AM

Please login or register to post a reply.

Related Fuse Panel Content

Fuse
GUIDE
Fuse
The design of a car fuse is to limit the amount of amperage being pulled through a particular circuit. When an electrical circuit has a problem such as a short to ground...
VIEW MORE

Sponsored links