SPONSORED LINKS

95 Mitsubishi Galant

Tiny
AZTEC209
  • MEMBER
  • 1995 MITSUBISHI GALANT
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 132,000 MILES
I have a 95 galant and the transmission wont run anymore. I went to work, parked it and when I was gonna go home it like shifted into 2nd gear or something and stoped working while still in the paking space. What could it be? The transmission computer or is it the transmission it self? The tranny had recently have its oil changed before this happened.
SPONSORED LINKS
Monday, November 15th, 2010 AT 4:56 PM

5 Replies

Tiny
LEGITIMATE007
  • MECHANIC
  • 5,121 POSTS
This is a manual tranny?
Was this
answer
helpful?
Yes
No
Monday, November 15th, 2010 AT 4:59 PM
Tiny
LEGITIMATE007
  • MECHANIC
  • 5,121 POSTS
Oh I see its automatic, is there a check engine light on? And does it just shut off by itself after you start it?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, November 15th, 2010 AT 5:00 PM
Tiny
MMPRINCE4000
  • MECHANIC
  • 8,548 POSTS
Other than checking the fluid level, have a trans shop check it out.

But when the trans fluid and filter was changed, they may have put wrong filter on or got some debris in valve body.
Was this
answer
helpful?
Yes
No
Monday, November 15th, 2010 AT 5:02 PM
Tiny
AZTEC209
  • MEMBER
  • 2 POSTS
There isn't any check engine lights on and it doesn't turn off. I had someone look at it from a shop and they said that somthing inside was broken but thats all he said. I thought he wasn't being honest with me becuase he wouldn't give me an explanations to my questions. Also the car will roll when place in nutral.
Was this
answer
helpful?
Yes
No
Monday, November 15th, 2010 AT 5:43 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,709 POSTS
Will it roll in park? Have you checked the linkage to make sure it is still attached?

As far as the issue, if the trans fluid is still full and clean and doesn't smell burned, it sounds like an electrical issue. My first guess, if nothing works, is the trans control module (TCM). If it doesn't shift from 2nd gear (stays there all the time), then it is in limp mode. That is to get you home or to a shop. You need to have the TCM scanned to see if any codes are stored.

Just fyi, it is normal for the car to roll in neutral.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, November 15th, 2010 AT 7:25 PM

Please login or register to post a reply.

Related Transmission Computer TCM Replace/Remove Content

VIEW MORE

Sponsored links