1995 Lincoln Town Car Suspension issue

1995 LINCOLN TOWN CAR
150,000 MILES • 4.6L • V8 • RWD • AUTOMATIC
Avatar
GEETHANKSALOTPAL
  • MEMBER
  • 1 POST
I have had to replace the compressor for the suspension on my car. we have tested the compressor by running a hot and ground from battery to compressor and it works, and we get power through the wires to the plug, but it doesn't seem to be getting a signal to start. I'm thinking that it's the control module, but I can't find anything as to it's location in the car to check it, or for that matter, replace it. Can you help?
Sep 9, 2015 at 7:21 AM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
have a pro scan it to make sure that is the problem as there is a relay for this as well. check items in pic . there are a few sensors that may be screwed up as well causing the problem so it has to be scanned to find problem.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Sep 9, 2015 at 11:36 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.