I have alot of play in my steering..way too much, what's the issue?

1995 JEEP CHEROKEE
157,000 MILES
Avatar
THIRTY3
  • MEMBER
  • 1 POST
I recently am having steering issues. power steering fluid was low a few weeks ago, so we put some in..recently I heard a few popping noises and now the steering is extremely loose..I have lost turning abuility in my right hand turns and again the steering is extremly loose
Dec 18, 2011 at 10:06 PM
Advertisement
Avatar
CARADIODOC
  • ASE Certified Mechanic
  • 34,321 POSTS
  • ASE Certified Mechanic
The symptoms suggest you have a rack and pinion steering assembly and it is coming apart. That starts with fluid leakage, then as it gets worse, the pinion gear can skip over the teeth on the rack. You might find the steering wheel has shifted position too but it has to be really bad for that to happen.

Wear can prevent the spool valve from opening and allowing pressurized fluid to provide the power assist for turning, and it usually affects turning one way worse than the other way.
Dec 18, 2011 at 11:35 PM
Avatar
CJ MEDEVAC
  • ASE Certified Mechanic
  • 11,004 POSTS
  • ASE Certified Mechanic
I'D SAY IT'S ONE OF THOSE "DRIVE NO MORE THINGS", UNTIL YOU GET IT FIXED!

DEFECTIVE STEERING IS KINDA ONE OF THOSE THINGS THAT MIGHT HAVE A NEGATIVE EFFECT ON YOUR LIFE AND THE LIVES OF OTHERS NEAR YOU

LET US KNOW WHAT YOUR RESULTS ARE

THE MEDIC
Dec 19, 2011 at 3:36 AM
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
I agree with both. Any steering issues need to be addressed ASAP.
Dec 19, 2011 at 6:46 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.