1995 Ford F-150 HOW TO REMOVE THE FRONT BRAKE ROTOR

I have done this , but the automatic hubs have three washer one with splines, one that is smaller than the next one which both are just fit over the axle , but which one goes on first, I know the one with splines goes on last. There is a picture but I cant see it ? Ok first off you need to remove the outer hub, there should be three screws that hold the outer hub on. Then there is a snap ring in the hub that you will need a pic to make it easier to pull out. Then you can remove the inner section of the hub, Then there is a snap ring or c ring remove it, then remove the washers and the cam assembly then the retainer key and then the wheel bearing nut then the rotor will slide off with the bearing. Here is a pic with a brake down of everything.


http://www.2carpros.com/forum/automotive_pictures/249564_front_hub_1.jpg