SPONSORED LINKS

1995 Dodge Dakota ignition switch

Tiny
TERRYSDODGE
  • MEMBER
  • 1995 DODGE DAKOTA
  • 230,000 MILES
If my ignition switch is bad could it cause my truck to die and not restart for a few hours. Im not getting any spark after it dies. I did check the harness at the ignition coil with a volt meter after it died one wire was constant the other would only flash for a second while being turned over by my buddy
SPONSORED LINKS
Tuesday, July 2nd, 2013 AT 11:33 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Here's a tip
The harness splice under the fuse block under the hood has a splice that corrodes and causes a no start condition check this if you have these symptoms check your asd relay as well
Was this
answer
helpful?
Yes
No
-1
Wednesday, July 3rd, 2013 AT 7:32 AM
Tiny
TERRYSDODGE
  • MEMBER
  • 13 POSTS
I checked the harness under the fuse block. Its ok. If the asd relay was bad would I still be getting fuel. Because im getting plenty of fuel just no spark
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Wednesday, July 3rd, 2013 AT 10:25 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Scan for codes and check resistance of cam and crank sensors they can have high resistance yet not give a code.I don't know what resistance is supposed to be check against a new one.
Was this
answer
helpful?
Yes
No
Wednesday, July 3rd, 2013 AT 12:04 PM

Please login or register to post a reply.

Related Ignition Switch Wiring Content

VIEW MORE

Sponsored links