1992 GMC Jimmy no power to full pump

Tiny
CHRIS843
  • MEMBER
  • 1992 GMC JIMMY
  • 4.3L
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 120,000 MILES
I have no power to full pump. I've put a new full pump in, i've checked the full pump relay an they are good, an i've checked all the ground wires an they are good. There is power to the ecm fuse but im still not getting any power to the full pump. I've even checked the oil pressure sending unit and its good an still no power. Any suggestions? (Would the computer be causing the problem?)
Tuesday, March 24th, 2015 AT 3:20 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check items in pic the orange is power to relay see if that gets it ecm B is fuse to check. Gray goes to tank blkwht to ground and grn/wht goes to pcm it can be a bd connection so check that stuff first. Pics show wiring and where fp relay is.
Was this
answer
helpful?
Yes
No
Tuesday, March 24th, 2015 AT 4:30 PM
Tiny
CHRIS843
  • MEMBER
  • 2 POSTS
I checked connectors they are good so I jumped the orange to the grey an it got power to the pump an its working so dose that mean the relay is bad and needs replacing?
Was this
answer
helpful?
Yes
No
Wednesday, March 25th, 2015 AT 9:12 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Either the relay is bad or it'snot getting a signal from pcm
Was this
answer
helpful?
Yes
No
Wednesday, March 25th, 2015 AT 9:23 AM

Please login or register to post a reply.

Sponsored links